MicroStrain® Wireless Sensor Networks
LORD MicroStrain® wireless sensor nodes offer low-power, embedded monitoring without the need to install or maintain wires.
Wireless Nodes | Acceleration, Load, Torque, Temperature, Voltage output sensor
G-Link-200-8G / Wireless 8G Accelerometer Sensor Node /
- On-board triaxial accelerometer with +/- 2, +/- 4, or +/- 8 g measurement range
- Continuous, periodic burst, and event-triggered sampling
- Output acceleration or derived vibration parameters (Vrms, Arms, App, Crest Factor)
- LXRS protocol allows lossless data collection, scalable networks, and node synchronization of ±50 μs.
- 1 Sample per hour to 4096 Samples per second
- Ruggedized IP-67 rated enclosure
G-Link-200-40G / Wireless 40G Accelerometer Sensor Node /
- On-board triaxial accelerometer with ±10, ±20, or ±40 g measurement range
- Continuous, periodic burst, and event-triggered sampling
- Output raw acceleration waveform data or derived vibration parameters (Velocity, Amplitude, Crest Factor)
- LXRS protocol allows lossless data collection, scalable networks, and node synchronization of ±50 µs.
- 1 Sample per hour to 4096 Samples per second
- Ruggedized IP-67 rated enclosure
G-Link-200-OEM / G-Link-200 OEM version (±2g or ±40g) /
- On-board triaxial accelerometer with ±2 to ±40 g measurement range
- Continuous, periodic burst, and event-triggered sampling
- Output raw acceleration waveform data or derived vibration parameters (Velocity, Amplitude, Crest Factor)
- 1 Sample per hour to 4096 Samples per second
- Wide input voltage from 3.3 to 36 V
V-Link-200 / Wireless 8 Channel Analog Input Sensor Node /
- 8x higher sample rate (up to 4,096 Hz), 4x more resolution (18-bit)
- Dual power options (long-life battery and hardwired)
- Four ±150 mVDC fully differential inputs, Four ±10 VDC single-ended inputs
- Onboard memory for 8m data points
SG-Link-200 / Wireless 3 Channel Analog Input Sensor Node /
- 3 differential input channels
- 1.5 or 2.5 V sensor power output
- High resolution 24-bit data
- Compatible with 120, 350, and 1kOhm Wheatstone bridge sensing circuits
- Remote strain calibration using on-board shunt resistor
- Up to 1 kHz continuous sampling rate
- Weatherproof IP-68
- Datalogging up to 8 million data points
SG-Link-200-OEM / SG-Link-200 OEM version /
- Up to 1024 Hz sampling
- Low noise 1.5 or 2.5 V sensor excitation
- Noise as low as 1 µV p-p
- High resolution 24-bit data
- Datalog up to 8 million data points
- Low power operation, well-suited for battery powered applications.
- Wireless range up to 1 km (400 m typical)
- -40 to +105° C operating temperature range
TC-Link-200 / Wireless 12 Channel Thermocouple Input Sensor Node /
- 12 input channels for thermocouples or differential voltage
- Compatible thermocouples types: J, K, N, R, S, T, E, B
- Onboard temperature calculation using NIST 9th order polynomial
- Onboard cold-junction compensation
- Open-circuit (burnout) detection
- Differential voltage range from +/- 19.5mV to +/- 1.25 V
- Low drift over time and temperature
- Digital filtering for up to 120 dB rejection of 50 and 60 Hz noise
TC-Link-200-OEM / 1 ch supporting Thermocouples, Resistance Thermometers and Thermistors /
- Up to 128 Hz sampling
- High resolution 24-bit data
- Digital filtering for up to 120 db rejection of 50 and 60 Hz noise
- Datalog up to 8 million data points
- Duty Cycle sensor excitation for low power operation, well-suited for battery powered applications
- Supply power from 3.3 to 30 V
- On-board linearization algorithms supporting a wide range of temperature transducers
RTD-Link-200 / Wireless 6 Channel Temperature Node (RTD or Thermistor) /
- 6 input channels for RTD, thermistor, or other resistive sensor
- Temperature calculation using NIST 9th order polynomial
- Compatible RTD’s: PT-10, PT-50, PT-100, PT-200, PT-500, PT1000
- Compatible thermistors: 44004, 44033, 44005, 44030, 44006, 44031, 44007, 44034, 44008, 44032, YSI-400
- High resolution 24-bit data
- Up to 64 Hz sampling rate
IEPE-Link-LXRS / Specialized High speed Node for piezoelectric devices /
- Accepts most IEPE accelerometers
- Designed for high speed, high resolution periodic burst sampling of Integral Electronic Piezoelectric (IEPE) and Integrated Circuit Piezoelectric (ICP) accelerometers
- Ideal for vibration sensing in challenging application, such as critical structure and machine health monitoring
- High resolution data with 24 bit A/D converter
- User-programmable 1 KHz to 104 KHz sample rates
- 109.5 dB dynamic range
- User-selectable low pass filtering
Torque-Link-200 / Specialized Analog Sensor Node /
- Two to six inch diameter shaft (standard), more sizes available on request
- One differential input channel (standard) for full-bridge strain gauge integration (two channels optional)
- Ideal for static and dynamic torque measurements with full temperature compensation and bending cancellation
- Alternative gauge configurations enable axial and bending measurements
- Rugged ABS housing designed for remote, long-term installation on cylindrical shafts
- Application-specific designs available on request
- Up to 1024 Hz sampling, High resolution 24 bit data
Gateways | USB, RS-232, Ethernet, Cloud-Based, Analog outputs
WSDA-2000 / Sophisticated Data Aggregation with J1939 and Ethernet Interfaces /
- Compatible with LORD Sensing LXRS and LXRS+ sensor nodes
- USB and Ethernet-based gateway configures, coordinates, and collects sensor data from a scalable network of wireless sensor nodes
- Configurable to operate with a static IP, a DHCP-enabled LAN, or as a datalogger to local memory
- Push all or selected sensor data to a J1939 CAN bus
- Seamless integration with SensorCloud™ for secure, webbased data access from around the world
WSDA-200-USB / USB Gateway /
- Data acquisition gateway collects synchronized data from scalable networks of wireless sensors
- Provides seamless communication between the wireless sensor nodes and host computer
- Quick deployment with host computer interface
- Compatible with all LORD Sensing LXRS and 200 Series sensing nodes
WSDA-Base-102-LXRS / RS232 Gateway /
- Data acquisition gateway collects synchronized data from scalable networks of wireless sensors
- Provides seamless communication between the wireless sensor nodes and host computer
- Quick deployment with RS-232 host computer interface
- Compatible with all LORD MicroStrain® sensor nodes
WSDA-Base-101-LXRS / Analog output Gateway /
- Data acquisition gateway collects synchronized data from scalable networks of wireless sensors
- Quick deployment with USB host computer interface
- Supports up to eight channels of analog outputs to data acquisition equipment (DAQ) from multiple nodes
- Can be used as a stand-alone device or simultaneously with a host computer
- Compatible with all LORD MicroStrain® sensor nodes